Currently I do own the following Amiga Systems:
Phase 5 CyberStorm MKII (MC68060/50MHz) with SCSI-Module, 128 MB PS2, 60ns, instead of the orginal A3640 (MC68040/25MHz)
Phase 5 CyberVision 64 with 4MB
MacroSystem's VLab Motion
MacroSystem's Toccata
2* IBM Ultrastar 2ES, 9 GB U-SCSI (DNES 309170) Harddisks
Fujitsu MCD3130SS 1.3GB MO-Drive
Sony CD-RW Burner
Nakamichi MJ-4.8si 4 Disk 8x CD-Wechsler
Village Tronic Ariadne network interface card
Arxon Scandoubler
HyperCOM 4
2. Floppy Drive (HD) Chinnon FZ-357A
fitted into an EYE Servertower with 16MB RAM onboard
an A2000 with:
Phase 5 Blizzard 2060 (MC68060/50MHz), 96 MB PS2, 60ns, reworked from MC68040@40MHz
Village Tronic Picasso IV graphics board with Pablo, Paloma and Concierto Module
Village Tronic Ariadne network interface card
HyperCOM 4
Highway USB-Card
Seagate Barracuda 9, 4.5GB (ST34573N)
Fujitsu MCD3130SS 1.3GB MO-Drive
Nakamichi MJ-5.16si 5 Disk 16x CD-Changer
NEC Multispin 3xi CDROM
2nd Floppy Drive (HD) Chinnon FZ-357A
an A4000D and a CD32 which are currently broken
an A2000T I'm currently building:
GVP G-Force 040/33 with 16MB
Village Tronic Ariadne network interface card
Village Tronic Picasso IV graphics board with Pablo and Paloma Module
IOBlix
Commodore A2091 SCSI HA with 2MB RAM
Fujitsu M2513A2 640MB MO-Drive
Toshiba 5701B
fitted into an AT-Tower
A600 (mainly used for testing the cnet.device) equipped with:
1GB CompactFlash card with IDE Adapter
4GB 2.5" IDE HD
and 3 A500 (one of them is currently broken) and a broken CD32 with at least the following (spare) parts:
GVP 530/40 with MMU and FPU (behaves strange)
GVP Series-II (with the well-known overclocking error)
Connexion network interface card (not very reliable)(currently missing)
BSC Multiface 3
2* BSC Multiface II
2* Oktagon 2008 with 4MB
Oktagon 508 with 6MB
Retina 4MB Graphics board
Commodore A590 (probably still broken)
Fujitsu M2622FA / M2624FA 330/520MB
Toshiba 5701B
Floppy drives (some are HD)(mostly Chinnon and Teak)
Quickbyte 5 EPROM Burner
MTEC 030/20
Village Tronic Ariadne network interface cards (one probably still broken)
DCE Megi Chip (quite temperatur sensitiv)
Phase 5 CyberStorm MKII (MC68060/50MHz) with SCSI-Module, reworked from MC68040/40MHz
Phase 5 CyberStorm PPC (604e/180MHz and MC68060/50MHz)
Phase 5 CyberStorm PPC (604e/200MHz and MC68060/50MHz)
Phase 5 CyberVision PPC with 8MB
Phase 5 CyberVision PPC with 8MB
Village Tronic Picasso IV graphics board
Merlin Graphics board with an Excalibur
Hydra Ethernet board (currently missing)
Commodore A2065 Ethernet board
Commodore A3640 CPU board
Commodore A3630 CPU board
Commodore A4000 D Motherboard (currently broken) with riser card
Micronic A500 Zorro Expansion board
Here are the Mountlists for the 3.5" MO-Drives.
Then I've listed some
Hardware-Tips for the
A4000T.
Further on a list of
PCMCIA Cards supported by the AMIGA A1200 and A600 and the
Rework instructions for Phase5/DCE Turboboards.
... back to my computer overview